1/2"-20 x 2" wheel studs, 12 point head (set of 10)

1/2"-20 x 3" wheel studs, 12 point head (set of 10)

12 Bolt pinion nut / washer combination

Replacement cap, billet steel, 3.062 bore case (each)

Richmond Gear, 30 spline pinion, 8620 material. 3 series carriers or MW ACG-030 case

Richmond Gear, 30 spline pinion C2-C3 Corvette, 8620 material. 3 series carriers or MW ACG-030 case

Motive Gear 3.55 Ratio, 30 spline pinion, 8620 material. 3 series carriers or MW ACG-030 case

Richmond Gear, 30 spline pinion C2-C3 Corvette, 8620 material. 3 series carriers or MW ACG-030 case

C2/C3 c-clip that can be machined to the precise thickness needed

Replace the original low carbon GM part, 4140 billet steel, heat treated and shot peened. 

Replace the original low carbon GM part, 4140 billet steel, heat treated and shot peened. 

Cross pin for C2/C3 MW Case. Uses GM 12-Bolt spider gears.   .809" diameter.