Toll Free: 1-866-508-6394
OR Contact Us
OR Contact Us
Shop by Category
MW bolt-on retainer kits allow you to easily use MW Pro-Street axles in GM and Ford rear end housings without replacing housing ends. All bolt-on kits utilize a heavy-duty Timken® unit bearing that can take thrust from either direction and exceeds radial and axial load capacity of common ball and roller bearings. Bolt-on ends are recommended if housing cannot be narrowed. Weld-on kits should be used when narrowing a housing.
 GM Pro Street Bearing Adapter Service Bulletin | Oval Track Bearing Adapter Service Bulletin |
| Pro Street Bearing Adapter Service Bulletin | GM Oval Track Bearing Adapter Service Bulletin |
Includes adaptors, hardware, seals, o-rings, bearings, and lock rings. (Requires small GM car brake - Camaro, Chevelle, Nova)
Must have large Ford ends with 3.150" bearing bore, 1/2" backing plate bolts. Includes, seals, o-rings, fastening hardware, and bearings
Includes retainers, o-rings, bearings, lock rings, and seals (requires large Ford ends with 3.150" bearing bore, 1/2" backing plate bolts)
Must have new style large Ford ends with 3.150" bearing bore, 3/8" backing plate bolts, and 3-9/16" x 2" pattern. Includes (2 ea) seals, o-rings, fastening hardware, and bearings
Includes (2 ea) retainers, o-rings, bearings, lock rings, and seals (requires new style Ford ends with 3.150" bearing bore, 3/8" backing plate bolts, and 3-9/16" x 2 pattern)
Must have GM small car brake. Includes, seals, o-rings, fastening hardware, and bearings